Results 1 to 7 of 7

Thread: PyNetMony v. 0.92 - WarWalking, BlueWalking & 2G/3G Netmonitor [Updated 23-APR-08]

  1. #1
    Senior Poster swankyleo's Avatar
    Join Date
    Mar 2007
    iPmart® forum

    Star PyNetMony v. 0.92 - WarWalking, BlueWalking & 2G/3G Netmonitor [Updated 23-APR-08]

    PyNetMony is a GSM, UMTS, WLAN and Bluetooth Monitor tool with support of internal, external or assisted GPS.
    It shows and logs GSM and UMTS network information like Cell ID, Location Area Code, Mobile Network Code , RX level and so on. It supports Nobbis clf v3.0 format, but only decimal at this time, please read the readme.txt for details.

    If you use a clf V3.0 with cell coordinates, the radar shows the cell position from your GPS position. The Map feature downloads a map centered with the current cell or your own GPS position in 12 different zoom levels.
    With a detailed clf file, it is possible to calculate a neighbour cells list around your current GPS or cell position within a certain radius.
    PyNetMony supports all display sizes. And it is freeware!

    All found WLAN and Bluetooth devices in range are logged into a file on e:\data\others\pynetmony\ You can also start a GSM/3G measurment log file, and a WLAN measurement log file, that logs the RX Lev and coordinates. If you press the upper arrow key you can toggle between SSID and MAC address.

    New in version 0.9.1:
    0.9.1 (2008-04-17)
    * corrected lat, lon in wlan log
    * check for valid coordinates before dowloading cell map
    * fixed division by zero error in distance calculations
    * increased saving and shutdown speed
    * changes in color scheme
    * fixed bug in open wlan voice notifier

    * install Python v1.4.2
    * go to Secured URL and sign all the folowing files with all 13 caps:
    - locationrequestor_3rd_unsigned.sis
    - wlantools-PyS60_1_4_1_3rdEdFP1-unsigned.sis
    - lightblue-0.3.1-s60-3rdEd_freedevcert.sis
    - blues_3rd_1_0_0_unsigned.SIS
    - envy_3rd_1_0_0_unsigned.SIS
    - PyNetMony_0_8_1-ck_unsigned.sis

    Install all sis files on C:!
    Please see readme.txt included in the zip for further instructions!
    For more info & help visit:[code][/code]

    For updated v0.9.2 see post #4 below
    Last edited by swankyleo; 24th April 2008 at 00:58.

  2. Welcome

    To see more of this thread, please login or register.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts